ExperTool
ExperTool
Tooling Systems

Tooling Systems

The assembly of the tools in machining centers is a key factor when machining and having pieces of high dimensional accuracy and surface quality. A bad tool holder system can reduce the life of the tool and machine spindle.

EXPERTOOL has a wide range of tools systems. In HSK we have all the variety of systems (HSK 40A, HSK50A, HSK63A, HSK80A, HSK100A, HSK32C, HSK40C, HSK50C, HSK63C, HSK40E, HSK80F, HSK-T)

EXPERTOOL has a wide range of cones with mechanical, hydraulic or Shrinking subjection (see Shrinking Technology section for details).

HSK advantages are summarized in: if the rotational speed increases the contact is guaranteed at all times, since the centrifugal force expands the jaws that hold the cone against the spindle shaft. The double contact provides greater repeatability when replacing the cone.

The most common disadvantages are impurities or traces of chip that can accommodate between the cone and the tool.

Hydraulic tool holders have an hydraulic pressure system that increases the clamping to very high values. Because the hydraulic system is isolated from the outside, impurities such as chips, etc. They can not harm the clamping system. Hydraulic cones minimize misalignment (runout) of the tool relative to the cone.

Besides accuracy and rigidity, the hydraulic cones are capable of withstanding high cutting forces (both lateral and torsional).

These cones are used in finishing operations and machining hard materials molds. Although they cost more precision finish allows them to reach the most demanding applications.

Shrinking tool holders do not have any internal system that makes pressure to hold the tool. Instead, the cone is solid with precision and grinded hole where the tool fits.

EXPERTOOL by HAIMER offers the highest quality precision tools in shrinking tool holders. Because elements such as bolts are not necessary, etc. to hold the tool provides a perfectly symmetrical cone, which eliminates any imbalances (see Shrinking Technology section for details).

We can optimize systems tools with your equipment such as: KM systems (manual or automatic clamping), BTKV and BT systems (BTKV 40, BTKV 50, BT30, BT40, BT50), CVKV, CV and DV systems (CVKV40, CVKV50 , CV40, CV50, DV40, DV50), QC systems (QC30, QC40, QC50), R8 systems (End mill adapters, drill chuck adapters, clamps nozzle DA) straight handle systems.

Please contact our technical staff to learn more about our solutions.

ExperTool | Offices
Barcelona
Polígono Industrial Rubí Sur
Avda. Antoni Gaudí, 142
08191 Rubí
Google Maps

Tel. +34 93 588 44 18
Fax +34 93 697 29 30
Barcelona
Madrid
Polígono Industrial "La Estación"
C/ Milanos, 10-Nave 54
28320 Madrid
Google Maps

Tel. +34 91 698 70 17
Fax +34 93 697 29 30
Madrid
Porto
Rua do Grés, 118
4445-266 Alfena, Valongo
Google Maps

Tel. +351 22 969 06 83
Fax +351 22 968 02 81
Porto
We use third-party cookies to analyze your browsing habits. If you continue browsing we will consider you accept the use of cookies. OK More info